Whether you just need to wash up your exterior paint or you are going to repaint your home, there is no doubt that new tips for how to pressure wash a house can help take off the stress. It is also good to know what type of equipment you’re dealing with before you begin in on how to pressure wash a house. This will make it easier for you to make the right decisions when it’s time to start cleaning. When choosing a pressure washer, for example, you may want one with a rotating brush or one with a fixed stream of bristles. These factors can make a big difference in how effectively and efficiently you are able to wash your house.
Painting: Whether you are painting your home fresh from the store or you are doing it yourself, taking some time to learn how to pressure wash a house with fresh paint will make a world of difference. No matter what type of paint you are using, making sure that you rinse the old paint off before you start washing is very important. When you do this, you will make sure that you don t end up using more water than is necessary to wash the area. If you do not, you can end up with a dirty and grimy surface underneath the painting that will make it hard for you to even start painting again.
Mildew: Although you want to use disinfectant products such as bleach when you are painting, using a mildew prevention product on the outside of the home is just as important. Most people have no idea that mildew can form on the outside of their home, even after they have been thorough with the cleaning. If you live in a moist area, such as near a creek or in a humid climate, mildew can be very easy to find. A simple wipe down with soap and water will remove any mildew on the exterior of your home but it is always wise to make sure that you have mildew protection for the inside of your home as well.
Water Jet: For areas of the home that need to be cleaned with very hot water, such as tile and siding, you will want to look into purchasing a water jet. These devices are designed to remove dirt, grease and grime from hard-to-reach places. Although these units do use some water, you will find that it is minimal and actually saves you money. Using a pressure washer on these types of hard-to-reach areas will actually make them easier to clean, which can save you even more money in the long run.
Blotting: Sometimes it can be very difficult to get all of the dirt and grime off of a particular spot. In these instances, you will want to take a moment and apply a detergent on one side and then work your way towards the other side. You will begin by spraying a light coating of detergent onto the area and working your way in. Blotting the area at least three times before proceeding to the next step will help to ensure that no traces of detergent will be left behind.
Foam Blower: A foam blower can also come in handy when cleaning your siding or your tile. One side of the unit has a nozzle that pumps out a fine mist of water and dirt and grime while the other side has a fan that will blow the air back onto the dirt and grime. This is a great option for areas that are extremely dirty and stubborn. Although, it does take some time and effort to complete, using a foam blower can be helpful in removing stains and dirt that may be impossible to remove without using a high-pressure washer on the affected areas.